MSE430

MUGEN COATING 4-Flute End Mill

●Our original MUGEN COATING has been put on 4-flute end mill.
●It can be cut from non-hardened materials to hardened materials.

  • Coating
    MUGEN COATING

  • Material
    Micro Grain Carbide

  • Cutting Possibility of Work Material Hardness
    Up to 52HRC

  • Number of Flutes
    4 Flutes

  • Helix Angle
    30°

  • Applications
    Side Milling

  • Applications
    Face Milling

Description of icons

Work Materials

Machinable indication by ,
Carbon Steel Alloy Steel Prehardened Steel Hardened Steel Stainless Steel Heat Resistant Alloy Aluminum Alloy Copper Resin Graphite Hard Brittle Material

52HRC

60HRC

65HRC

70HRC

Carbon Steel Heat Resistant
Alloy
Alloy Steel Aluminum Alloy
Prehardened
Steel
Copper
Hardened
Steel

52HRC
Resin

60HRC
Graphite

65HRC
Hard Brittle
Material

70HRC
Hard Brittle
Material
Stainless Steel

Line up

Unit [size: mm]

Code
No.
(D)Dia. (l)Length of Cut (γ)Neck Taper Angle (d)Shank Dia. (L)Overall Length Semi-standard
08-00110-00100 1 2.5 4 45
08-00110-00150 1.5 4 4 45
08-00110-00200 2 5 4 45
08-00110-00250 2.5 7 4 45
08-00110-00300 3 8 6 50
08-00110-00350 3.5 9 6 50
08-00110-00400 4 10 6 50
08-00110-00450 4.5 12 6 55
08-00110-00500 5 13 6 55
08-00110-00550 5.5 14 6 55
08-00110-00600 6 15 6 55
08-00110-00650 6.5 17 8 60
08-00110-00700 7 18 8 65
08-00110-00750 7.5 19 8 65
08-00110-00800 8 20 8 65
08-00110-00850 8.5 22 10 70
08-00110-00900 9 23 10 70
08-00110-00950 9.5 24 10 75
08-00110-01000 10 25 10 75
08-00110-01200 12 30 12 80
08-00110-01400 14 35 12 100
08-00110-01500 15 40 16 110
08-00110-01600 16 40 16 110
08-00110-01800 18 45 16 120
08-00110-02000 20 50 20 135

means the sizes will no longer be on sale after the stock runs out.