MHR230R
MUGEN COATING 2-Flute Long Neck Corner Radius End Mill
●Minimized chattering by peripheral cutting edge designed for minimal contact to work material.
●Realized high efficiency milling by obtaining larger radial depth of cutting comparing with Ball End Mill.
●Corner R accuracy : ±5μm (2.5D and below)
●Better performance in wide range of machining of direct carving on Hardened Steels,Prehardened Steels and Copper Electrode.
-
Coating
MUGEN COATING -
Material
Micro Grain Carbide -
Cutting Possibility of Work Material Hardness
Up to 52HRC -
Number of Flutes
2 Flutes -
Helix Angle
30° -
Conner Radius
±0.005(D≦2.5) -
Applications
Side Milling -
Applications
Slot Milling -
Applications
Face Milling
Carbon Steel | Alloy Steel | Prehardened Steel | Hardened Steel | Stainless Steel | Heat Resistant Alloy | Aluminum Alloy | Copper | Resin | Graphite | Hard Brittle Material | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
~ 52HRC |
~ 60HRC |
~ 65HRC |
~ 70HRC |
||||||||||
Carbon Steel | Heat Resistant Alloy |
|||
---|---|---|---|---|
Alloy Steel | Aluminum Alloy | |||
Prehardened Steel |
Copper | |||
Hardened Steel |
~ 52HRC |
Resin | ||
~ 60HRC |
Graphite | |||
~ 65HRC |
Hard Brittle Material |
|||
~ 70HRC |
Hard Brittle Material |
|||
Stainless Steel |